Exploring Modules and Variable Scope in Julia Programming

By: Steven Whitaker

Re-posted from: https://glcs.hashnode.dev/modules-variable-scope

Julia is a relatively new,free, and open-source programming language.It has a syntaxsimilar to that of other popular programming languagessuch as MATLAB and Python,but it boasts being able to achieve C-like speeds.

One way to organize Julia codeis to split functionalityinto individual functions.When enough functions exist,it may become usefulto group the functions together,along with any relevant global variables,constants,and type definitions.Julia provides modules for this purpose.

Modules form the backbone of Julia packages,helping to organize codeand minimize namespace collisions.

In this post,we will learn aboutmodules in Julia,and we will discuss how to create and use them.Because modules each have their own global scope,we will also learn aboutscoping rules for variables.

This post assumes you already havea basic understanding of variables and functionsin Julia.You should also understand the differencebetween functions and methods.If you haven’t yet,check out our earlierpost on variables and functionsas well as our post on multiple dispatch,which explains the differencebetween functions and methods.

Modules

The syntax for creating a module is

module ModuleName# Code goes here.end

Here’s an example module:

module MyModuleusing Statisticsconst A = "A global constant"const B = [1, 2, 3]func(x) = println("A: ", A, "\nmean(B): ", mean(B), "\nx: ", x)export A, funcend

Let’s walk through this code.

  • First,the module loads another package:

    using Statistics

    Modules can load packages,just like we can do in the REPL.When a package is loaded in a module,the package is brought into the module’s namespace,meaning the loaded symbols(i.e., names referring to functions, types, constants, etc.)are not visible outside of the module.For example:

    julia> module StatsModule       using Statistics       endMain.StatsModulejulia> mean([1, 2, 3])ERROR: UndefVarError: `mean` not defined

  • Next,the module defines its own data and functionality:

    const A = "A global constant"const B = [1, 2, 3]func(x) = println("A: ", A, "\nmean(B): ", mean(B), "\nx: ", x)

    This is the codewe want to organize into a module.Typically,there are more lines of code,and they are saved in one or more separate filesthat are just included by the module via

    include("mycode.jl")
  • Finally,the module specifies some exports: 
    export A, func

    Modules can export symbolsthat are then made availablewhen the module is loaded with using.

Using Modules

When a module is created,it can be referred toby its name,and any symbols in its namespacecan be accessedby prepending the module name,e.g., MyModule.func.(This is called a qualified name.)

julia> MyModuleMain.MyModulejulia> MyModule.func(1)A: A global constantmean(B): 2.0x: 1

If we want to make exported symbolsavailable without using a qualified name,we can load the module with using:

julia> using .MyModulejulia> A"A global constant"

(Here we note one differencebetween packages and modules:packages can be loaded with using PackageName,whereas modules need their nameto be prepended with a period,as seen above.)

After loading a module with using,unexported symbolsare not made directly available,but they can still be accessedvia a qualified name:

julia> BERROR: UndefVarError: `B` not definedjulia> MyModule.B3-element Vector{Int64}: 1 2 3

If we want to make an unexported symbolavailable without using a qualified name,we can explicitly load it:

julia> using .MyModule: Bjulia> B3-element Vector{Int64}: 1 2 3

import Statements

import is another keywordthat can be used to load modules and packages.

import .MyModule will make availablejust the name MyModule,not any exported symbols:

julia> import .MyModulejulia> func(false) # Error, even though `func` is exportedERROR: UndefVarError: `func` not definedjulia> MyModule.func(false) # Qualified names still workA: A global constantmean(B): 2.0x: false

Using vs. import

import also allows methodsto be added to a module’s functionswithout using a qualified name:

julia> import .MyModule: funcjulia> func() = println("Method 2")func (generic function with 2 methods)julia> func()Method 2julia> func("MyModule.func")A: A global constantmean(B): 2.0x: MyModule.func

For comparison,below are two similar examples that use using:

  1. julia> using .MyModule: funcjulia> func() = println("Method 2")ERROR: error in method definition: function MyModule.funcmust be explicitly imported to be extended

    Here,we learn that we cannot add a methodto a function from another modulewithout importing the function,as we did earlier,or referring to the functionwith its qualified name,as shown below:

    julia> using .MyModulejulia> MyModule.func() = println("Method 2")julia> func()Method 2julia> func("MyModule.func")A: A global constantmean(B): 2.0x: MyModule.func
  2. julia> using .MyModulejulia> func() = println("Method 2")func (generic function with 1 method)julia> func()Method 2julia> func("MyModule.func")ERROR: MethodError: no method matching func(::String)julia> MyModule.func("MyModule.func")A: A global constantmean(B): 2.0x: MyModule.func

    Here,we see that,even though func is exported from MyModule,we created a different func functionin the REPLbecause we did not import funcor use a qualified name.As a result,future uses of func from MyModulemust use its qualified name.

Adding methods to a module's function

Finally,import enables renaming symbols:

julia> import .MyModule as MMjulia> MM.A"A global constant"julia> import .MyModule: B as NEWNAMEjulia> NEWNAME3-element Vector{Int64}: 1 2 3

Common Modules

Now that we know how modules work,let’s learn about a few modulesthat every Julia programmer will come across:Main, Base and Core.

  • Main:It turns out that all Julia codeexecutes within a module.When Julia starts,a module named Main is created,and code that runsthat isn’t explicitly contained in a module(e.g., code in the REPL)is executed within Main.
  • Base:Much of Julia’s basic functionality,including functions like+, print, and getindex,is defined in a module named Base.This module is automatically loadedinto all modules(with few exceptions).
  • Core:Code that is considered built-in to Julia,i.e., code Julia needs to be able to function,lives in a module named Core.This module also is automatically loadedinto all modules(with even fewer exceptions).

Variable Scope

Variable scope refers to where in codea variable is accessible.It therefore has implicationsfor when two pieces of codecan use the same variable namewithout referring to the same thing.

There are three types of scopes in Julia:global scope, hard local scope, and soft local scope.We will discuss each of these in turn.

Global Scope

Symbols defined within a global scopecan be accessed within the global scopeand any local scopescontained in the global scope.

Each module defines its own global scope.Importantly,there is no universal global scope,meaning there is nowherewe can define, e.g., xand have x refer to the same thing everywhere,even across modules.

Also note that global scopes do not nest,in the sense that a nested modulecannot refer to a containing module’s global variable:

julia> module A           a = 1           module B               b = a # `a` is undefined here, even though `B` is nested within `A`           end       endERROR: UndefVarError: `a` not defined

Hard Local Scope

Symbols defined within a hard local scopecan be accessed within the local scopeand any contained local scopes.

Functions, let blocks, and comprehensionseach introduce a hard local scope.

In a hard local scope,variable assignment always assignsto a local variableunless the variable is explicitly declared as globalusing the global keyword:

julia> let           x = 1 # Assigns to a local variable `x`       end;julia> xERROR: UndefVarError: `x` not definedjulia> let           global x           x = 1 # Assigns to a global variable `x`       end;julia> x1

Furthermore,if there is a local variable, e.g., x,in an outer local scope,assignment to x in an inner local scopewill assign to the same xin the outer local scope:

julia> let           x = 0           for i = 1:10               s = x + i               x = s # `x` is the existing local variable, not a new one           end           x # 55, not 0       end55

In particular,it will not create a new local named xunless x is explicitly declared localin the inner scope.This is called shadowing,where names can be reusedto refer to different things:

julia> x = 1; # A global `x`julia> let           x = 2 # A local `x` shadowing the global `x`           let               local x               x = 3 # An inner local `x` shadowing the outer local `x`               @show x # Shows `x = 3`           end           @show x # Shows `x = 2`, not `x = 3`       end;x = 3x = 2julia> @show x; # Shows `x = 1`, not `x = 2` or `x = 3`x = 1

Another example of shadowing:

julia> x = 1; # A global `x`julia> function f(x)           x + 1 # This `x` refers to the local `x`, not the global one       end;julia> f(3) # Computes `3 + 1`, not `1 + 1`4

Soft Local Scope

for, while, and try blockseach introduce a soft local scope.

Soft local scope is the same as hard local scopeexcept in interactive contexts(e.g., when running code in the REPL)and when assigning to a variable(let’s call it x)while the following conditions are met:

  1. x is not already a local variable.
  2. All enclosing local scopes are soft.(To illustrate,nested for loops within the REPLwould satisfy this condition,while a for loop in a functionwould not.)
  3. A global variable x is defined.

In this case,the global variable x is assigned(as opposed to creating a new local variable x,as would be done in a hard local scope).(See the Julia documentationfor the rationale.)

Variable scope

Summary

In this post,we learned how to create and use modules in Juliafor organizing code.We also learned about Julia’s scoping rulesfor global, hard local, and soft local scopes.

How do you use modules in your code?Let us know in the comments below!

Have a better feel for howmodules and variable scope work?Move on to thenext post to learn how to learn new Julia packages!Or,feel free to take a lookat our other Julia tutorial posts.

Additional Links

Exploring Modules and Variable Scope in Julia Programming

By: Great Lakes Consulting

Re-posted from: https://blog.glcs.io/modules-variable-scope

Julia is a relatively new,
free, and open-source programming language.
It has a syntax
similar to that of other popular programming languages
such as MATLAB and Python,
but it boasts being able to achieve C-like speeds.

One way to organize Julia code
is to split functionality
into individual functions.
When enough functions exist,
it may become useful
to group the functions together,
along with any relevant global variables,
constants,
and type definitions.
Julia provides modules for this purpose.

Modules form the backbone of Julia packages,
helping to organize code
and minimize namespace collisions.

In this post,
we will learn about
modules in Julia,
and we will discuss how to create and use them.
Because modules each have their own global scope,
we will also learn about
scoping rules for variables.

This post assumes you already have
a basic understanding of variables and functions
in Julia.
You should also understand the difference
between functions and methods.
If you haven’t yet,
check out our earlier
post on variables and functions
as well as our post on multiple dispatch,
which explains the difference
between functions and methods.

Modules

The syntax for creating a module is

module ModuleName

# Code goes here.

end

Here’s an example module:

module MyModule

using Statistics

const A = "A global constant"
const B = [1, 2, 3]

func(x) = println("A: ", A, "\nmean(B): ", mean(B), "\nx: ", x)

export A, func

end

Let’s walk through this code.

  • First,
    the module loads another package:

    using Statistics

    Modules can load packages,
    just like we can do in the REPL.
    When a package is loaded in a module,
    the package is brought into the module’s namespace,
    meaning the loaded symbols
    (i.e., names referring to functions, types, constants, etc.)
    are not visible outside of the module.
    For example:

    julia> module StatsModule
       using Statistics
       end
Main.StatsModule

julia> mean([1, 2, 3])
ERROR: UndefVarError: `mean` not defined

  • Next,
    the module defines its own data and functionality:

    const A = "A global constant"
const B = [1, 2, 3]

func(x) = println("A: ", A, "\nmean(B): ", mean(B), "\nx: ", x)

    This is the code
    we want to organize into a module.
    Typically,
    there are more lines of code,
    and they are saved in one or more separate files
    that are just included by the module via

    include("mycode.jl")
  • Finally,
    the module specifies some exports:

    export A, func

    Modules can export symbols
    that are then made available
    when the module is loaded with using.

Using Modules

When a module is created,
it can be referred to
by its name,
and any symbols in its namespace
can be accessed
by prepending the module name,
e.g., MyModule.func.
(This is called a qualified name.)

julia> MyModule
Main.MyModule

julia> MyModule.func(1)
A: A global constant
mean(B): 2.0
x: 1

If we want to make exported symbols
available without using a qualified name,
we can load the module with using:

julia> using .MyModule

julia> A
"A global constant"

(Here we note one difference
between packages and modules:
packages can be loaded with using PackageName,
whereas modules need their name
to be prepended with a period,
as seen above.)

After loading a module with using,
unexported symbols
are not made directly available,
but they can still be accessed
via a qualified name:

julia> B
ERROR: UndefVarError: `B` not defined

julia> MyModule.B
3-element Vector{Int64}:
 1
 2
 3

If we want to make an unexported symbol
available without using a qualified name,
we can explicitly load it:

julia> using .MyModule: B

julia> B
3-element Vector{Int64}:
 1
 2
 3

import Statements

import is another keyword
that can be used to load modules and packages.

import .MyModule will make available
just the name MyModule,
not any exported symbols:

julia> import .MyModule

julia> func(false) # Error, even though `func` is exported
ERROR: UndefVarError: `func` not defined

julia> MyModule.func(false) # Qualified names still work
A: A global constant
mean(B): 2.0
x: false

Using vs. import

import also allows methods
to be added to a module’s functions
without using a qualified name:

julia> import .MyModule: func

julia> func() = println("Method 2")
func (generic function with 2 methods)

julia> func()
Method 2

julia> func("MyModule.func")
A: A global constant
mean(B): 2.0
x: MyModule.func

For comparison,
below are two similar examples that use using:

  1. julia> using .MyModule: func

julia> func() = println("Method 2")
ERROR: error in method definition: function MyModule.func
must be explicitly imported to be extended

    Here,
    we learn that we cannot add a method
    to a function from another module
    without importing the function,
    as we did earlier,
    or referring to the function
    with its qualified name,
    as shown below:

    julia> using .MyModule

julia> MyModule.func() = println("Method 2")

julia> func()
Method 2

julia> func("MyModule.func")
A: A global constant
mean(B): 2.0
x: MyModule.func

  2. julia> using .MyModule

julia> func() = println("Method 2")
func (generic function with 1 method)

julia> func()
Method 2

julia> func("MyModule.func")
ERROR: MethodError: no method matching func(::String)

julia> MyModule.func("MyModule.func")
A: A global constant
mean(B): 2.0
x: MyModule.func

    Here,
    we see that,
    even though func is exported from MyModule,
    we created a different func function
    in the REPL
    because we did not import func
    or use a qualified name.
    As a result,
    future uses of func from MyModule
    must use its qualified name.

Adding methods to a module's function

Finally,
import enables renaming symbols:

julia> import .MyModule as MM

julia> MM.A
"A global constant"

julia> import .MyModule: B as NEWNAME

julia> NEWNAME
3-element Vector{Int64}:
 1
 2
 3

Common Modules

Now that we know how modules work,
let’s learn about a few modules
that every Julia programmer will come across:
Main, Base and Core.

  • Main:
    It turns out that all Julia code
    executes within a module.
    When Julia starts,
    a module named Main is created,
    and code that runs
    that isn’t explicitly contained in a module
    (e.g., code in the REPL)
    is executed within Main.
  • Base:
    Much of Julia’s basic functionality,
    including functions like
    +, print, and getindex,
    is defined in a module named Base.
    This module is automatically loaded
    into all modules
    (with few exceptions).
  • Core:
    Code that is considered built-in to Julia,
    i.e., code Julia needs to be able to function,
    lives in a module named Core.
    This module also is automatically loaded
    into all modules
    (with even fewer exceptions).

Variable Scope

Variable scope refers to where in code
a variable is accessible.
It therefore has implications
for when two pieces of code
can use the same variable name
without referring to the same thing.

There are three types of scopes in Julia:
global scope, hard local scope, and soft local scope.
We will discuss each of these in turn.

Global Scope

Symbols defined within a global scope
can be accessed within the global scope
and any local scopes
contained in the global scope.

Each module defines its own global scope.
Importantly,
there is no universal global scope,
meaning there is nowhere
we can define, e.g., x
and have x refer to the same thing everywhere,
even across modules.

Also note that global scopes do not nest,
in the sense that a nested module
cannot refer to a containing module’s global variable:

julia> module A
           a = 1
           module B
               b = a # `a` is undefined here, even though `B` is nested within `A`
           end
       end
ERROR: UndefVarError: `a` not defined

Hard Local Scope

Symbols defined within a hard local scope
can be accessed within the local scope
and any contained local scopes.

Functions, let blocks, and comprehensions
each introduce a hard local scope.

In a hard local scope,
variable assignment always assigns
to a local variable
unless the variable is explicitly declared as global
using the global keyword:

julia> let
           x = 1 # Assigns to a local variable `x`
       end;

julia> x
ERROR: UndefVarError: `x` not defined

julia> let
           global x
           x = 1 # Assigns to a global variable `x`
       end;

julia> x
1

Furthermore,
if there is a local variable, e.g., x,
in an outer local scope,
assignment to x in an inner local scope
will assign to the same x
in the outer local scope:

julia> let
           x = 0
           for i = 1:10
               s = x + i
               x = s # `x` is the existing local variable, not a new one
           end
           x # 55, not 0
       end
55

In particular,
it will not create a new local named x
unless x is explicitly declared local
in the inner scope.
This is called shadowing,
where names can be reused
to refer to different things:

julia> x = 1; # A global `x`

julia> let
           x = 2 # A local `x` shadowing the global `x`
           let
               local x
               x = 3 # An inner local `x` shadowing the outer local `x`
               @show x # Shows `x = 3`
           end
           @show x # Shows `x = 2`, not `x = 3`
       end;
x = 3
x = 2

julia> @show x; # Shows `x = 1`, not `x = 2` or `x = 3`
x = 1

Another example of shadowing:

julia> x = 1; # A global `x`

julia> function f(x)
           x + 1 # This `x` refers to the local `x`, not the global one
       end;

julia> f(3) # Computes `3 + 1`, not `1 + 1`
4

Soft Local Scope

for, while, and try blocks
each introduce a soft local scope.

Soft local scope is the same as hard local scope
except in interactive contexts
(e.g., when running code in the REPL)
and when assigning to a variable
(let’s call it x)
while the following conditions are met:

  1. x is not already a local variable.
  2. All enclosing local scopes are soft.
    (To illustrate,
    nested for loops within the REPL
    would satisfy this condition,
    while a for loop in a function
    would not.)
  3. A global variable x is defined.

In this case,
the global variable x is assigned
(as opposed to creating a new local variable x,
as would be done in a hard local scope).
(See the Julia documentation
for the rationale.)

Variable scope

Summary

In this post,
we learned how to create and use modules in Julia
for organizing code.
We also learned about Julia’s scoping rules
for global, hard local, and soft local scopes.

How do you use modules in your code?
Let us know in the comments below!

Additional Links