Switching from Common Lisp to Julia

By: Tamás K. Papp

Re-posted from: https://tamaspapp.eu/post/common-lisp-to-julia/

I have written this post for developers in the Common Lisp community who asked why I am switching to Julia. It may only be relevant for the small set of people who use Common Lisp for scientific computing.

I used Common Lisp for scientific computing for a while, from 2008 to about 2015, in combination with R and C++. This choice may surprise people who don’t know about projects like Maxima or FEMLISP, but Common Lisp is not a bad language for scientific computing: it has a great FFI, compilers like SBCL can generate very fast code with a few hints, and the language itself is composed of convenient features that interact nicely.

However, around 2012 I started to become very frustrated with Common Lisp. Despite various attempts, it became very clear that libraries for scientific computing were not goint to take off: there were many one-person efforts (including mine), but very few of them evolved into general tools.

Initially, I was puzzled by this: Common Lisp is an extremely convenient and productive language. Experienced Lisp hackers can write very complex, fast, and elegant libraries in reasonably short time. Why did this not happen for numerical code?

The problem with Common Lisp

Now I think that one of the main reasons for this is that while you can write scientific code in CL that will be (1) fast, (2) portable, and (3) convenient, you cannot do all of these at the same time. Arrays provide a convenient example for this.

Consider

(make-array 5 :element-type 'double-float)

The standard does not guarantee that this gives you an array of double-float: it may (if the implementation provides them), otherwise you get an array of element type T. This turned out to be a major difficulty for implementing portable scientific code in Common Lisp.

However, this gets worse: while you can tell a function that operates on arrays that these arrays have element type double-float, you cannot dispatch on this, as Common Lisp does not have parametric types. For example, if you want to write a sum as

(defmethod mysum ((vec vector))
  (let ((s 0))
    (loop for elt across vec
       do (incf s elt))
    s))

you can dispatch on the argument being a vector, but not on the element type. The compiled code may be generic.

You can of course branch on the array element types and maybe even paper over the whole mess with sufficient macrology (which is what LLA ended up doing), but this approach is not very extensible, as eventually you end up hardcoding a few special types for which your functions will be "fast", otherwise they have to fall back to a generic, boxed type. With multiple arguments, the number of combinations explodes very quickly.

How Julia solves this problem

A comparable native implementation in Julia would be1

function mysum(vec::AbstractVector{T}) where T
    s = zero(T)
    for elt in vec
        s += elt
    end
    s
end

This is still generic: it works for all subtypes of AbstractVector (including vectors and vector-like objects), but notice how the generated code is conditional on the element type:

julia> @code_warntype mysum([1, 2, 3])
Variables:
  #self#::#mysum
  vec::Array{Int64,1}
  elt::Int64
  #temp#::Int64
  s::Int64

Body:
  begin 
      s::Int64 = 0 # line 3:
      #temp#::Int64 = 1
      4: 
      unless (Base.not_int)((#temp#::Int64 === (Base.add_int)((Base.arraylen)(vec::Array{Int64,1
})::Int64, 1)::Int64)::Bool)::Bool goto 14                                                     
      SSAValue(2) = (Base.arrayref)(vec::Array{Int64,1}, #temp#::Int64)::Int64
      SSAValue(3) = (Base.add_int)(#temp#::Int64, 1)::Int64
      elt::Int64 = SSAValue(2)
      #temp#::Int64 = SSAValue(3) # line 4:
      s::Int64 = (Base.add_int)(s::Int64, elt::Int64)::Int64
      12: 
      goto 4
      14:  # line 6:
      return s::Int64
  end::Int64

julia> @code_warntype mysum([1.0, 2.0, 3.0])
Variables:
  #self#::#mysum
  vec::Array{Float64,1}
  elt::Float64
  #temp#::Int64
  s::Float64

Body:
  begin 
      s::Float64 = (Base.sitofp)(Float64, 0)::Float64 # line 3:
      #temp#::Int64 = 1
      4: 
      unless (Base.not_int)((#temp#::Int64 === (Base.add_int)((Base.arraylen)(vec::Array{Float64
,1})::Int64, 1)::Int64)::Bool)::Bool goto 14                                                   
      SSAValue(2) = (Base.arrayref)(vec::Array{Float64,1}, #temp#::Int64)::Float64
      SSAValue(3) = (Base.add_int)(#temp#::Int64, 1)::Int64
      elt::Float64 = SSAValue(2)
      #temp#::Int64 = SSAValue(3) # line 4:
      s::Float64 = (Base.add_float)(s::Float64, elt::Float64)::Float64
      12: 
      goto 4
      14:  # line 6:
      return s::Float64
  end::Float64

I mentioned "vector-like objects" above, since I can choose different representations for special objects. For example, to do calculations with a vector of 1s, I can define

struct Ones{T <: Number} <: AbstractVector{T}
    len::Int
end

At this point, in order to calculate the sum above, I have two choices:

  1. Implement the relevant interface, with functions like
Base.length(x::Ones) = x.len

and similarly for element access, etc. This would generate specialized code for the method above, reasonably efficient code, but still iterate over the "elements".

  1. In addition, I can define
mysum(vec::Ones{T}) where T = vec.len * one(T)

which would provide a method for mysum.

A sufficiently rich parametric type system with multiple dispatch integrated into the language and supported by a JIT compiler is the secret weapon of Julia. Most of the time, you don’t have to do anything, as it happens automatically for concrete types. Sometimes, you have to help the compiler a bit, by writing code where the result is type stable, ie the result type just depends on the type (not the value) of the arguments and can be inferred by the compiler. Sometimes you have to nudge the compiler a bit, and sometimes you have to be careful not to mess up type inference: for example, the zero(T) above gives a 0 of type T, always ensuring a correct type that does not change during the summation.

Comparison of other language features

While I would say that multiple dispatch with parametric types designed into the language from the ground up is the most important feature of Julia, there are other language features worth comparing to Common Lisp.

Metaprogramming is supported. Because of infix syntax, the AST is not as simple as S-expressions, but the tools to work with it are evolving fast. That said, I don’t write as many macros as I did in Common Lisp. Parametric types are so powerful that I rarely need macros for performance reasons, and instead of syntax extensions, I often go for zero-cost abstraction via functions and wrapper types. An interesting metaprogramming tool in Julia is generated functions, which allow code generation based on argument templates, I use this frequently. The equivalent of reader macros are called non-standard string literals in Julia.

The foreign function interface of Julia is seamlessly integrated into the language and very convenient to use. Docstrings are almost the same as in Common Lisp, but they support Markdown. Strings are UTF8 by default, and very fast. The community is very vibrant, open, and helpful. Simple questions get an answer within minutes, complicated ones (eg compiler internals) may take a bit longer, but are usually answered within a few hours or a day at most. If you are coming from the Common Lisp community, you will see quite a few familiar faces.

The library ecosystem already surpasses that of Common Lisp, at least for scientific programming. High-quality, well-tested code is available for linear algebra including sparse matrices (most of it in the standard library), optimization, differential equations, and automatic differentiation. The latter is simply amazing: by providing a type for dual numbers and a few operations, forward-mode AD can be used without any implementation overhead. Plotting libraries are available (mostly using foreign function backends), and R-like "dataframes" are under development.

Conclusion

Common Lisp has been and remains a great language, with many excellent features that preceded other languages by decades. It has an ANSI standard, which means that portable code written decades ago will run on a recent implementation. This is a great advantage, but at the same time this freezes the language development at the point the standard was finalized. No matter how flexible and forward-looking it is, it cannot predict and accommodate all possible advances for decades.

In contrast, Julia is rapidly evolving. At this stage, code that was written half a year ago is very likely to be broken with the most recent release.2 The pace of change will most likely slow down a bit after 1.0 is released, but for now, expect a lot of churning.

On the other hand, programmers who used Common Lisp for scientific computing have always expected to get their hands dirty, since so little existing code was available. This is a good time to consider investing into Julia instead: you will get more done with less work, and you still get to program in a very elegant language that traces a lot of its roots to the Lisp family.


  1. This is not the fastest, nor the most precise implementation, just a comparable example. [return]
  2. An elegant deprecation mechanism is available, but that can’t deal with some fundamental language changes. [return]